A. Port: 3/4" NPT inflation/deflation port

B. Inflation Quick Disconnect: Brass quick disconnect for inflation

C. Pressure relief valves: set to release at 2.5 psi above ambient pressure Enough pressure relief valves are installed in each bag to allow expanding air to vent should a free ascent occur

D. Material: Heavy-duty ballistic-rated nylon fabric coated with urethane

E. Harness: A heavy nylon lift harness built into the body and has safe working ratio of 6:1, heavy 2" load rated

F. Connection: All EFBs can be used with a single pick point with the shackle. Can also be inverted to use the two stainless steel rings on the top of the bag with tow pick points.

 

Subsalve Liftbags have all necessary hardware and are ready for immediate use. Each Subsalve Lift Bag is tested prior to shipping and must meet rigorous US Department of Defense requirements.

Use Subsalve underwater lift bags for boat salvage, marine rescue operations and
underwater explosive ordnance disposal systems