![]()
![]() |
A. Port: 3/4" NPT inflation/deflation port B. Inflation Quick Disconnect: Brass quick disconnect for inflation C. Pressure relief valves: set to release at 2.5 psi above ambient pressure Enough pressure relief valves are installed in each bag to allow expanding air to vent should a free ascent occur D. Material: Heavy-duty ballistic-rated nylon fabric coated with urethane E. Harness: A heavy nylon lift harness built into the body and has safe working ratio of 6:1, heavy 2" load rated F. Connection: All EFBs can be used with a single pick point with the shackle. Can also be inverted to use the two stainless steel rings on the top of the bag with tow pick points.
|
| Subsalve Liftbags have all necessary hardware and are ready for immediate use. Each Subsalve Lift Bag is tested prior to shipping and must meet rigorous US Department of Defense requirements. | |